Decor outlook: what is rising, peaking and cooling in US homes this week

RoomForecast

Free tool · Elevation

Curtain Size Calculator

Type the window, the height of the sill and the ceiling, then choose the fullness and the length style. The calculator gives the rod width and height, how many 50 in panels to buy and which stock length, drawn on the wall to scale.

  • Free
  • Runs in your browser
  • Inches or centimetres
Your measurements
Rod height
Fullness
Length
Front elevation · to scale
PanelsRodWindow

Method

How we worked this out

The rod runs 8 to 12 in past the window trim on each side, so open curtains stack on the wall instead of over the glass, and it sits 4 to 6 in above the trim, or halfway between the trim and the ceiling for a taller look. The calculator never puts the rod closer than 1½ in to the ceiling.

Panel width comes from fullness: the total width of fabric is the rod width times 1.5 (flat, modern), 2 (the usual full look) or 2.5 (rich, heavy). That width is divided by 50 in, the most common US panel width, and rounded up to an even number so the window gets a pair.

Length is the drop from the rod to where the hem lands: half an inch above the sill, about 4 in below it over the apron trim, half an inch off the floor for the floor kiss, or 4 in of extra fabric on the floor for a puddle. The calculator rounds up to the next stock length, 63, 84, 96, 108 or 120 in, and says how much to hem. It assumes the top of the panel is level with the rod; rings or clips hang a panel a little lower, so measure from the ring eyelet if you use them.

Questions

Asked often

How wide should a curtain rod be?

About 8 to 12 in wider than the window trim on each side, so a 48 in window takes a rod of roughly 64 to 72 in, not counting the finials.

How many curtain panels do I need?

Multiply the rod width by the fullness (2 is the usual) and divide by the panel width. A 68 in rod at 2× fullness needs 136 in of fabric, which is three 50 in panels, rounded up to four for a pair.

What length curtains should I buy?

Measure from the rod to where the hem should land, then buy the next stock length up (63, 84, 96, 108 or 120 in) and hem the difference. Floor-length curtains should end about half an inch above the floor.

More decor tools